File Transfer Job

The File Transfer job enables you to watch and transfer files from a local host to a remote host, a remote host to a local host, a remote host to another remote host, or between Cloud storage buckets and containers.

A File Transfer job can contain up to five different file transfer definitions, which are executed sequentially. Each definition can transfer one or more files, or an entire directory with the option of including all of its sub-directories.

File Transfer jobs are integrated with other Control-M jobs into a single scheduling environment.

A File Transfer job enables you to do the following:

Rerun file transfers from the exact point where the transfer failed, which saves time and resources, see File Transfer Optional Attributes.
Determine how to handle files after a transfer, see File Transfer Advanced General Attributes.
Encrypt the transferred files with different encryption methods, see File Transfer SFTP Attributes.
Configure pre and post transfer and PGP commands, see File Transfer Commands Attributes.
Watch specific files until a maximum size is reached or a defined time has passed, and then transfer the files, see File Transfer File Watcher Attributes.

Defining a File Transfer Job

This procedure describes how to define a File Transfer job, which enables you to watch and transfer files from a local host to a remote host, a remote to a local host, or a remote host to another remote host.

Control-M for AFT jobs on Control-M/Agent and Control-M MFT jobs on another Control-M/Agent cannot belong to the same Host group.

Before you begin

Configure a Control-M Managed File Transfer connection profile, as described in Creating a Centralized Connection Profile.

Begin

From the General tab, in the Profile Type field, select one of the following:
- Two Single Endpoints: Shows connection profiles that are defined with one host. Select this option if the source and destination locations are defined in separate connection profiles.
- Endpoint1 <-> Endpoint2: Shows connection profiles that are defined with two hosts. Select this option if the source and destination locations are defined in the same connection profile.
  - If you are transferring a file to an external user, you must select the connection profile that is connected to the Hub that uses an SFTP protocol.
  - AS2 connection profiles can be paired with Local connection profiles only. FTP and SFTP are not supported.
  - S3 does not support transfers to and from AS2, MVS, OS400, OS2200, OpenVMS, and TANDEM.
  - S3 and Google Cloud Storage do not support appending content to objects. Therefore, Rerun from point of failure and Append destination action are not supported.
In the Connection profile field, click .

The Select Connection Profile dialog box appears.
Select the connection profile(s) that you want to use to transfer files, and click OK.

If you are transferring a file to or from S3, Azure Blob, or Google Cloud Storage, in the Bucket or Container field(s), click and select the required bucket or container.
In the File Transfers area, do the following:
1. In the left field, browse for the file, directory, or library to transfer. You can also type the path manually.
  - If you are transferring a file to an external user, you must type in the B2B Subfolder home directory (example: /b2bhome) that is defined in MFT Enterprise B2B settings, as described in General Settings .
  - In AS2 you cannot determine the destination file path. You can override the destination filename, subject, and content type.
2. In the right field, browse for the file, directory, or library to transfer. You can also type the path manually. If you are transferring a file to multiple hosts, select one of the following:
  - Home Directory: Transfer the file to the home directory on each host.
  - Common Destination Path: Transfers the file to the same location on each host defined here.
  - Different Destination Paths: Transfers the file to different destinations on each host. Click and define each path by browsing to each file in File Selection or modify the locations in one view in Paths List.
  You can use variables in the left or right transfer fields, as described in File Transfer Advanced General Attributes.
3. Select the transfer option, as described in Transfer Options.
  If a transfer has CJK or Latin-1 characters in the filename, the Control-M/EM server and Control-M/Server databases must be compatible with this format.
Click Advanced.

The File Transfers dialog box appears.
Select the required options, as described in File Transfer Advanced General Attributes, and click OK.
Select Binary or Ascii from the dropdown list.

EBCDIC format is supported only when transferring files between two MVS FTP hosts.
Select optional parameters if required, as described in File Transfer Job.
Click the Advanced drop down list.

The Pre-execution Command and Post-execution Command fields are used to define specific commands to execute at the beginning or at the end of a job. These commands can only be executed on a computer where Control-M/Agent is installed, and the output of the commands (pre or post) appears in the job output.

Transfer Options

If you have successfully watched a file using a variable, you can share that variable to an additional transfer in the Source path within the same job using the following variables.

The following table lists the Transfer Options.

Icon	Description
	Transfers the file from Host1 to Host2
	Transfers the file from Host2 to Host1
	Watches the file until it reaches a certain size or passes a time limit, and then transfers the file from Host1 to Host2. For more information on file watching, see File Transfer File Watcher Attributes.
	Watches the file until it reaches a certain size or passes a time limit, and then transfers the file from Host2 to Host1.
	Watches the file until it reaches a certain size or passes a time limit. For more information on file watching, see File Transfer File Watcher Attributes.
	Lists all the files and directories from either the source or destination hosts or both in the job output. This option enables you to get a snapshot of a directory listing to save, archive, or mail it or automate a following process that needs all files in that content. Directory of C:\Users\vagrant\AppData\Roaming\Microsoft\Windows\ServerManager 05/17/2014 06:47 AM 341 ServerList.xml If the Recursive option is selected, all sub directories and files are included in the job output. For each directory or pattern matching string, the job output includes the exact output from the local, FTP, SFTP, or S3 response for the LIST, DIR, or ls command.
	(Windows/Linux only) Synchronizes all files from host1 to host2 by comparing all files in the source and destination folders based on the last modification and does the following: Transfers all files that appear in the source directory and do not appear in the destination. Transfers files only if the source file timestamp is more recent than the destination file timestamp. Deletes all files in the destination folder that do not appear in the source. To synchronize sub-directories, use the Recursive option. You can use file pattern in the source path to synchronize specific files. For example: */src_path/.pdf**
	(Windows/Linux only) Synchronizes all files from host2 to host1 by comparing all files in the source and destination folders based on the last modification and does the following: Transfers all files that appear in the source directory and do not appear in the destination. Transfers files only if the source file timestamp is more recent than the destination file timestamp. Deletes all files in the destination folder that do not appear in the source. To synchronize sub-directories, use the Recursive option. You can use file pattern in the source path to synchronize specific files. For example: */src_path/.pdf**

$$WATCH_ALLn$$: Determines the full file name including the extension of the successfully watched file
$$WATCH_NAMEn$$: Determines the file name only without the extension of the successfully watched file
$$WATCH_EXTn$$: Determines the extension of the successfully watched file

n represents the number of the watch/transfer of the possible 5 in the job.

If you selected the Rerun from point of failure checkbox, you cannot use the above variables.

File Transfer Optional Attributes

Attribute	Description
End job NOTOK when “Continue on failure” option is selected	If the file transfer job fails and the Continue on failure checkbox is selected, the job status changes to NOTOK.
Rerun from point of failure	Resumes the file transfer from the point that it failed. If you are connecting to an FTP server you must select this checkbox and the Restart from failure checkbox, as described in Creating a Centralized Connection Profile. The transfer can only be resumed from the exact position where the failure occurred if the FTP server supports REST commands. If you HOLD a job and then rerun it, the job automatically reruns from the beginning. If the Append option is selected in the General tab, the Rerun from point of failure option is ignored. If you are transferring a file from one host to a group of hosts, you cannot use this option.
Number of retries	Uses the default or a custom number of retries to re-establish a failed connection. If you are using a z/OS platform, this checkbox is disabled.

Attribute

Description

End job NOTOK when “Continue on failure” option is selected

If the file transfer job fails and the Continue on failure checkbox is selected, the job status changes to NOTOK.

Rerun from point of failure

Resumes the file transfer from the point that it failed.

If you are connecting to an FTP server you must select this checkbox and the Restart from failure checkbox, as described in Creating a Centralized Connection Profile.

The transfer can only be resumed from the exact position where the failure occurred if the FTP server supports REST commands.

If you HOLD a job and then rerun it, the job automatically reruns from the beginning.

If the Append option is selected in the General tab, the Rerun from point of failure option is ignored.

If you are transferring a file from one host to a group of hosts, you cannot use this option.

Number of retries

Uses the default or a custom number of retries to re-establish a failed connection.

If you are using a z/OS platform, this checkbox is disabled.

File Transfer Advanced General Attributes

The File name field in the Source file action after successful completion, Destination file action after successful completion and Create Empty File fields parameters can contain variables, constants, and the following variables:

$$AFTFILE$$: Contains the name of the original file without file extension. (If there was an extension, it is always added to the name of the file.)
$$AFTFILE_ALL$$: Contains the full file name including the extension
$$AFTFILE_NAME$$: Contains only the name of the file until the last dot (without the extension)
$$AFTFILE_EXT$$: Contains only the extension of the file name

If you want to rename a transferred file old_cmd_060101.exe, when it was originally named cmd.exe, the pattern you must specify is old_$$AFTFILE$$_%%DATE.

The following table lists the File Transfer Advanced General attributes.

Attribute	Description
Source file action after successful completion	Determines how a source file is handled after a successful transfer, as follows: Leave as is: Retains the source file with the original name. Delete file: Deletes the source file. Rename file: Renames the source file with a valid name for the operating system of the host computer (256 characters). Move file: Moves the file to a specified location (full path only) (Not available for z/OS). Change permission: Changes the UNIX permission level of the file, such as 755. Run command on file: Runs a specific command on the file on File System connection profile only. (Windows only) The format must be as follows: cmd /c <command> If you are running a script a script or executable file you need one of the following: The full path to the file. The folder of the file must be in the PATH environment variable. The file must be located in the <Agent>\cm\AFT folder. If the action fails, Control-M for MFT attempts a retry according to the number of retries Variable Name: %%FTP-SRCOPTx
File Name	Determines the path and name of the file. Rules: Characters: 1-256 Case sensitive: Yes Variable Name: %%FTP-NEWNAMEx
Fail transfer when action on source file failed	Determines whether to fail the transfer when a post action on the source file fails after a successful transfer. Variable Name: %%FTP-SRC_ACT_FAILx
If a file with the exact same name as already exists	Determines how to manage a file that has the same name as the destination file, as follows: Overwrite: Replaces the existing file with the transferred file. Append: Attaches the transferred file to the existing file and transfers multiple files into one combined file using a wildcard character. Abort: Cancels the file transfer. Skip: Skips the file. Add counter: Adds a numerical value to the filename. Add timestamp: Adds a timestamp to the filename. Variable Name: %%FTP-IF-EXISTx
Destination file action after successful completion	Determines how a destination file is handled after a successful transfer, as follows: Leave as is: Retains the source file with the original name Rename file: Renames the source file with a valid name for the operating system of the host computer (256 characters). To define the destination filename for each file that is transferred when the destination path is a directory, see Destination Filename parameters. Move file: Moves the file to a specified location (full path only) (Not available for MVS) Change permission: Changes the UNIX permission level of the file, such as 755. Run command on file: Runs a specific command on the file on File System connection profile only. (Windows only) The format must be as follows: cmd /c <command> If you are running a script a script or executable file you need one of the following: The full path to the file. The folder of the file must be in the PATH environment variable. The file must be located in the <Agent>\cm\AFT folder. Add empty file: Adds an empty file in the destination to signal that the file transferred successfully. Variable Name: %%FTP-DSTOPTx
Fail transfer when the action on the destination file failed	Determines whether to fail the transfer when a post action on the destination file fails after a successful transfer.
Use temporary file prefix	Prevents overwriting files by attaching a temporary file prefix or suffix, such as FTP_ to the destination file until the transfer completes successfully. OS/400: The file name is limited to 10 characters. The temporary prefix or suffix can be up to 99 characters long on all other systems. z/OS: The file name is limited to 8 characters. The temporary file name that is created by applying the prefix or suffix must be a valid file name for the operating system of the destination host computer. Rules: Characters 1-99 Variable Name: %%FTP-FILE_PFXx
Create empty file in destination	Creates an empty file after a transfer on the destination host. If you are transferring a file or multiple files, the empty file is created in the directory where the file(s) are transferred. If you are transferring a directory, the empty file is created in the directory where the transfer directory is created. This feature does not work in Recursive mode. Variable Name: %%FTP-EMPTY_DEST_FILE_NAMEx
Continue on failure	Allows successive transfers to run when this specific transfer fails. Variable Name: %%FTP-CONT_EXEx
Do post AFT command on failure	Activates the defined post commands when the job fails. Variable Name: %%FTP-POSTCMD_ON_FAILUREx
Delete destination file on failure	Deletes the destination file if the transfer failed. If you transferred multiple files, the last file that failed is deleted. Variable Name: %%FTP-DEL_DEST_ON_FAILUREx
Recursive	Transfers a file directory with all its sub-directories and all files that match the wildcard pattern in the source file path field under all sub-directories. Files are transferred in the destination with the same directory structure as the source directory structure.
Exclude Files	Determines whether to exclude all the files that match the transfer pattern when you define a transfer with a wildcard.
Do not delete destination directory files during directory synchronization	Determines whether to delete destination directory files during directory synchronization. Variable Name: %%FTP-SYNC_DIR_NO_DELn
Incremental Transfer (transfer files based on modified timestamp since the last successful job execution)	Determines whether to transfer files that were added or modified in the source directory since the last successful job execution. You might want to use this option in a cyclic job to transfer the changes from the source directory. You might want to use this option in a cyclic job to transfer the changes from the source directory. This parameter is not available for Watch or Watch & Transfer options. UNIX/Linux only To synchronize sub-directories, use the Recursive option. You can use file pattern in the source path to transfer specific files. For example: */src_path/.pdf If the FTP server is in a different time zone than the Control-M/Agent, you need to add the ftp.timezone.offset** additional parameter in the connection profile with the relevant timezone of the FTP server host, as described in Connection profile manual additional parameters.
Transfer files based on on modified timestamp in the last __ hours on the first job execution	Determines whether to transfer files that were modified in the specified interval or to transfer all files that match the pattern on the first job execution.

File Transfer OS400 Attributes

The following table lists the File Transfer OS400 attributes.

Attribute	Description
Trailing blanks options for OS/400 database record	Determines how Trailing Blanks are managed: Send Trailing Blanks: The server sends trailing blanks for all database records. This option is relevant only for files that are transferred in ASCII mode. Do not send Trailing blanks for Database files with file structure: The server does not send trailing blanks of database records when transferring files that use a file structure and stream mode. Do not send Trailing blanks for all Database files: The server does not send trailing blanks for any database records. Variable Name: %%FTP-TRIMx
Allow Transfer of Files with NULL Fields	Transfers files to an OS400 platform with NULL fields. Variable Name: %%FTP-NULLFLDSx
Allow OS400 IFS Case Sensitive Mode	Supports the transfer of case sensitive file systems. Variable Name: %%FTP-CASEIFSx

Attribute

Description

Trailing blanks options for OS/400 database record

Determines how Trailing Blanks are managed:

Send Trailing Blanks: The server sends trailing blanks for all database records. This option is relevant only for files that are transferred in ASCII mode.
Do not send Trailing blanks for Database files with file structure: The server does not send trailing blanks of database records when transferring files that use a file structure and stream mode.
Do not send Trailing blanks for all Database files: The server does not send trailing blanks for any database records.

Variable Name: %%FTP-TRIMx

Allow Transfer of Files with NULL Fields

Transfers files to an OS400 platform with NULL fields.

Variable Name: %%FTP-NULLFLDSx

Allow OS400 IFS Case Sensitive Mode

Supports the transfer of case sensitive file systems.

Variable Name: %%FTP-CASEIFSx

File Transfer z/OS Attributes

The following table lists the File Transfer z/OS attributes in the z/OS tab:

Attribute	Description
Template Name	Defines the name of the z/OS template that is defined in z/OS Template Parameters. Rules: Characters: 1-64 Case sensitive: Yes Variable Name: %%FTP-TEMPLATEx
Record Format	Determines the value for the record format. Variable Name: %%FTP-TEMPLATEx
Logical Record Length	Determines the logical record length values between 0-32760. Variable Name: %%FTP-LRECLx
Block Size	Determines the block size values between 0-32760. Variable Name: %%FTP-BLKSIZEx
Translate Table	Determines what table is used by the FTP server during transfer for translation (8 characters maximum or select from list). If you want to add or delete values to and from the list, you need to add them as comma separated values, to the XLT.dat file in the following location: <Control-M/Agent_Directory>/cm/AFT/data Variable Name: %%FTP-TRANSTABx
DBCS Encoding	Determines which DBCS data sets is used for the transfer. Variable Name: %%FTP-DBCSx
Additional Options	Defines the z/OS FTP Server SITE command sub-parameters and values (214 characters maximum). To work with GDG data sets, type: DCbdsn=model_dataset_name. Variable Name: %%FTP-ADDOPTxy
Allocation Units	Determines which allocation unit type is used for the transfer. Variable Name: %%FTP-ALLOCUNITSx
Volume	Defines the volume value (6 characters maximum). Variable Name: %%FTP-VOLUMEx
Unit	Defines unit value (8 characters maximum) Variable Name: %%FTP-UNITx
Primary	Defines the primary allocation amount between 1-16777215. Variable Name: %%FTP-PRIMARYx
Secondary	Defines the secondary allocation amount between 0-16777215. Variable Name: %%FTP-SECONDARYx
Transfer Mode	Determines the mode used to transfer files. Block: Transfers the file as a series of data blocks preceded by one or more header bytes. Stream: Transfers the file as a stream of bytes. Variable Name: %%FTP-TRANSMODEx
SMS Management Class	Determines which SMS Management Class is assigned to a new data set. Rules: Characters 1-8 Variable Name: %%FTP-MGMTCLASS
SMS Data Class	Defines the SMS Data Class provided by your organization for the FTP server. Rules: Characters 1-8 Variable Name: %%FTP-DATACLASS
Transfer to Unique File	Creates a file with a unique name on the remote system instead of overwriting an existing file. The FTP server on the remote system sends the name of the created file back to the File Transfer client. If you select this option, you cannot do any of the following: Use a temporary prefix for the destination file Rename the destination file Rerun from point of failure Variable Name: %%FTP-UNIQUEx

File Transfer SFTP Attributes

The following table lists the File Transfer SFTP attributes.

Attribute	Description
Compression	Compresses the file before the transfer. Variable Name: %%FTP-COMPRESSIONxy x is either 1 or 2 and indicates the z/OS host (1 refers to the host defined on the left side of the Connection Profile Details dialog box, and 2 refers to the host defined on the right side of the Connection Profile Details dialog box). y indicates a value between 1-5, according to the sequential transfer number For example, when performing a file transfer from one z/OS host to another z/OS host, the variable: %%FTP-COMPRESSION21 contains the compression value to set for the connection to the z/OS host defined on the right side of the Connection Profile Details dialog box, in the first file transfer.
Preserve the File Attributes and Timestamps	Preserves the source’s file permissions and timestamps on the destination host. Variable Name: %%FTP-PRESERVE_ATTRx

Attribute

Description

Compression

Compresses the file before the transfer.

Variable Name: %%FTP-COMPRESSIONxy

x is either 1 or 2 and indicates the z/OS host (1 refers to the host defined on the left side of the Connection Profile Details dialog box, and 2 refers to the host defined on the right side of the Connection Profile Details dialog box).

y indicates a value between 1-5, according to the sequential transfer number

For example, when performing a file transfer from one z/OS host to another z/OS host, the variable:

%%FTP-COMPRESSION21 contains the compression value to set for the connection to the z/OS host defined on the right side of the Connection Profile Details dialog box, in the first file transfer.

Preserve the File Attributes and Timestamps

Preserves the source’s file permissions and timestamps on the destination host.

Variable Name: %%FTP-PRESERVE_ATTRx

File Transfer Commands Attributes

The following table below lists the File Transfer Commands attributes.

Attribute	Description
FTP pre command	Determines the pre-command for each host, as follows: chmod: Changes the file permissions. You can use a wildcard to define this parameter. mkdir: Creates a directory. rename: Renames a file or a directory. rm: Deletes a file. You can use a wildcard to define this parameter. rmdir: Deletes a directory. Variable Names: %%FTP-PRECOMM1x %%FTP-PRECOMM2x Except for the local host, where the default path is the Control-M/Agent's home directory, you must define the full path when you run the chmod, mkdir, rename, rm, and rmdir commands. For z/OS hosts you do not need to define the full path. You can use the home directory path that is defined in the connection profile definition.
Fail transfer when the command on the source host failed	Determines whether to fail the transfer when the command on the source host fails before or after a successful transfer.
FTP post command	Determines the post command for each host, as follows: chmod: Changes the file permissions. You can use a wildcard to define this parameter. mkdir: Creates a directory. rename: Renames a file or a directory. rm: Deletes a file. You can use a wildcard to define this parameter. rmdir: Deletes a directory. Variable Names: %%FTP-POSTCOMM1x %%FTP-POSTCOMM2x
Fail transfer when the command on the destination host failed	Determines whether to fail the transfer when the command on the destination host fails before or after a successful transfer.
Enable PGP encryption	Enables PGP encryption commands for this transfer. Variable Name: %%FTP-PGP_ENABLEx
PGP operation	Determines whether to encrypt or decrypt the transfer. Variable Name: %%FTP-PGP_OPERATIONn
Keep encrypted files	Saves the PGP encrypted file after encryption with the following name format: <filename>.pgp_aft Variable Name: %%FTP-PGP_KEEP_FILESx
Template Name	Determines the name of the PGP template that is defined in Creating a PGP Template. Variable Name: %%FTP-PGP_TEMPLATE_NAMEx

Destination Filename Attributes

The following table describes attributes that enable you to change the destination filename for each file that is transferred when the destination path is a directory. The order of the changes to the destination filename is by Name Pattern, Find & Replace, and then Case Handling.

Attribute	Description
Pattern	Defines the rename pattern of the destination filenames based on the following attributes. [N] Filename (use [N#-],[N#-#] for substring) [E] Extension (use [E#-],[E#-#] for substring) [C] Counter (use [C#] to pad with preceding zeros) [D] Listing date ([YYYYMMDD] format) [T] Listing time ([hhmmss] format) The pattern value must include at least one parameter.
Find & Replace	Renames the destination file according to find and replace.
Case Handling	Do not change case: The destination filename remains with the same case. Convert to uppercase: The destination filename is changed to uppercase. Convert to lowercase: The destination filename is changed to lowercase.

Attribute

Description

Pattern

Defines the rename pattern of the destination filenames based on the following attributes.

[N] Filename (use [N#-],[N#-#] for substring)
[E] Extension (use [E#-],[E#-#] for substring)
[C] Counter (use [C#] to pad with preceding zeros)
[D] Listing date ([YYYYMMDD] format)
[T] Listing time ([hhmmss] format) The pattern value must include at least one parameter.

Find & Replace

Renames the destination file according to find and replace.

Case Handling

Do not change case: The destination filename remains with the same case.
Convert to uppercase: The destination filename is changed to uppercase.
Convert to lowercase: The destination filename is changed to lowercase.

Destination Filename Examples

The following table shows examples of typical Destination filename attributes usage.

Source Name	Pattern	Find and Replace	Case	Destination filename
sample_file.txt	[N3-].[E]	Find: file Replace: cool	unchanged	mple-cool.txt
sample-file.docx	[N].[E2-3]		To uppercase	SAMPLE-FILE.OC
Sample-File.txt	[N] ([C3]).[E]	Find: mp Replace: <empty>	To lowercase	sale-file (001).txt Only if it is the first file.
simple.simple.txt	[N]-[D]	Find: ple Replace: on		simon.simon-20190704

File Transfer File Watcher Attributes

The following table below lists the File Transfer File Watcher attributes.

Attribute	Description
Time limit type	Determines whether the values defined in the Time Limit field are number of minutes to wait or an absolute time. Variable Name: %%FTP-ABSTIMEx
Time limit	Determines the number of minutes to wait, in the Time Limit field, for a file to reach its minimum detected size and remains static, before the watch fails or determines the specific time, in the Time Limit field, that a file has to reach its minimum detected size and remains static, before the watch fails. Variable Name: %%FTP-TIMELIMITx
Minimum detected size	Defines the minimum number of bytes transferred before Control-M File Transfer checks if the file is static. File size information for remote file systems is not supported. This feature is not supported on OS400, Tandem, MVS, and OS2200 when the connection type is FTP. Variable Name: %%FTP-MINSIZEx
Minimum file age	Defines the minimum number of years, hours, and/or days that must pass since the watched file was last modified. 2y3d means that after 2 years and 3 days must pass before the file can be watched. Variable Name: %%FTP-FILE_MIN_AGEx
Maximum file age	Defines the maximum number of years, hours, and/or days that can pass since the watched file was last modified. 2y3d means that after 2 years and 3 days have passed the file is no longer watched. Variable Name: %%FTP-FILE_MAX_AGEx
Override default interval between file searches	Determines whether to override the value of the Interval between file searches field in Configuration dialog box in the CCM.
If age and size criteria are not met, continue searching matching files	Determines whether to continue searching the remaining files if the first file that matches the name pattern doesn't match the size and age criteria.
Transfer all matching the name pattern	Determines whether to transfer all remaining static files that match the name pattern (regardless of the size and age) after a single file matches all criteria. Variable Name: %%FTP-TRANSFER_ALLx
Transfer files matching size and age criteria	Determines whether to transfer all remaining static files that match the name, size, and age criteria after a single file matches all criteria Variable Name: %%FTP-TRANSFER_ALLx
Variable containing detected file name	Defines the variable name that contains the detected file name. Variable Name: %%FTP-WATCHNAMEx
Variable type	Determines whether the variable is one of the following: Global: Enables you to use the variable in other jobs that are utilized by the same Control-M/Server. Local: Enables you to use the variable in this job only. Named Pool: Enables any job in the same Named Pool that you define to reference the variable in any subsequent jobs in the post-processing actions of the job, or in the script itself in the next run of the job.

The Maximum file age and Minimum file age features are supported if the user defined for the watch host has write permissions on the destination path.
In the job log, if the OSCOMPSTAT parameter is 7 it indicates that file watch failed.

Transfer Formats

The following table describes the different formats you can use to transfer files, directories or libraries.

Transfer Format	Description
File to File	Transfers a single file from a defined source to a defined destination. To transfer Readme.txt from its source location to a defined destination, renaming the file to Writeme.txt, define D:\Temp\Readme.txt in the source transfer field, and C:\Directory1\Writeme.txt in the destination transfer field. If no file name is specified in the destination transfer field, the file retains its original name. However, a destination file name must be specified when MVS is the transfer destination.
Directory and Contents (OS/400, Microsoft Windows and UNIX only)	Transfers a directory from a defined source to a defined destination. To transfer the /h/userb/ directory to /p/home2/, define /h/userb/ in the source transfer field, and /p/home2/ in the destination transfer field. The userb directory is created under /p/home2/. The Recursive transfer option is available. If this is selected, all sub-directories are also transferred.

Transfer Format

Description

File to File

Transfers a single file from a defined source to a defined destination.

To transfer Readme.txt from its source location to a defined destination, renaming the file to Writeme.txt, define D:\Temp\Readme.txt in the source transfer field, and C:\Directory1\Writeme.txt in the destination transfer field.

If no file name is specified in the destination transfer field, the file retains its original name. However, a destination file name must be specified when MVS is the transfer destination.

Directory and Contents (OS/400, Microsoft Windows and UNIX only)

Transfers a directory from a defined source to a defined destination.

To transfer the /h/userb/ directory to /p/home2/, define /h/userb/ in the source transfer field, and /p/home2/ in the destination transfer field. The userb directory is created under /p/home2/.

The Recursive transfer option is available. If this is selected, all sub-directories are also transferred.

MVS, OS/400, and OS2200 systems support the * wildcard character but only when defined as the latter part of a file name.
MVS supports the % wildcard character.
If you use a wildcard, and no files match the defined pattern, the job ends successfully.
Transfer of file names with spaces are supported only for platforms that support a convention of file names that include blanks.

Control-M for MFT Job Statuses

The following table describes the different statuses in a Control-M for MFT job:

Status	Description
Waiting	Waiting for execution.
In progress	File is transferring.
Ended OK	Transfer completed successfully.
Failed	File failed to transfer.
Killed	Transfer is canceled by request.
Abandoned	File did not transfer due to a previous transfer that failed.
Skipped	File transferred successfully in a previous attempt, but it is part of a job that failed. File transfer is skipped when the job returns.
File Watching	File is watched until it reaches a certain size or has reached a maximum time limit.

If you are transferring a file from z/OS, OS/400, or OpenVMS, or transferring more than a single file in a recursive transfer, the size of the transferred files is not known. Therefore, the progress bar and Time Remaining fields are set at zero and updated to 100% at the end of a successful file transfer. Similarly, the Transferred Out of Total and Rate fields are updated every 30 seconds.